Wastewater Treatment Services

WASTEWATER TREATMENT SERVICES

Industrial Service Solutions designs and manufacturers a variety of process water and wastewater treatment systems for municipalities, commercial and residential developments, disaster relief and military support.

Sequencing Batch Reactors

MINIMUM SPACE, MAXIMUM EFFICIENCY

The Wagner Fluid Systems Sequence Batch Reactor (SBR) is an aeration process for the complete treatment of municipal, industrial and agricultural wastewaters. The process takes place in a single tank and is capable of removing BOD, ammonia, suspended solids and nutrients (including Nitrates and Phosphorus). Sewage is treated in a series of four distinct sequences.

Each reaction estimates a total of four hours to complete. An initial fill cycle allows raw sewage to enter the tank. An aeration cycle then begins converting non- volatile sludge (humus) and ammonia is oxidized to nitrate. After the aeration cycle is complete, a precipitation phase allows the sludge to settle under quiescent conditions. Treated effluent is then decanted from the tank during a decant phase, after which, the cycle is repeated.

A Wagner Fluid Systems SBR will typically consist of two or more tanks, allowing one tank to discharge treated effluent while another tank is available to accept sewage flow. The process contains minimal in- basin equipment ensuring affordable capital cost. The simple design and ease of operation ensures reduced maintenance and operation expenses.

Key Points

Food Processing, Industrial & Municipal wastewater applications
One tank for all cycles & steps: Fill, React, Settle, Decant, & Idle
Complete efﬂuent treatment, including nutrient removal
Tolerates variable hydraulic & organic loading
Offered in both continuous & batch operating modes
Precisely controlled positively driven Jack Screw decanter
PLC (Programable Logic Control)

Decanters

VERTICALLY DRIVEN, HIGHLY RELIABLE

The heart of every sequencing batch reactor (SBR) system is the decanter. The decanter is responsible for removing clarified effluent from the basin during the decant phase of the sequence cycle.

The Wagner Fluid SBR by Ram Industrial Services is an advanced SBR technology that may be designed for batch or continuous inflow. All SBR processes are operated using defined cycle times adjusted to variable flow conditions. Each cycle typically consists of four main phases; fill, aerate, settle and decant. The basin may be aerated fill or anoxic fill during the first half of the cycle. After the aeration phase, the system goes into a settling phase where liquid/solids separation occurs. In the final step, clear water is decanted out of the basin.

The Wagner Fluid System decanter is installed on the basin wall supported by a stainless steel fabrication, grating and railing that provides a stable platform for maintenance and plant operators. The decanter is lowered and raised using an electro-mechanical jack screw actuator. The actuator moves the decanter between two set point elevations from the “park” position to the bottom water level (BWL). The decanter parks above top water level during the aeration and settling phases of the cycle, thereby eliminating any possibility of solids carryover during these periods.

The decanter operation and speed is controlled through use of a variable frequency drive (VFD). As a result, the decanter discharge rate is constant from the time the decanter enters the water to the time it reaches the BWL. Effluent volume per linear foot of weir is controlled and constant versus gravity style decant systems.

At “park” position, the decanter provides “fail safe” overflow protection in the event of a power failure. Settled supernatant flow raise the scum gate floats allowing water to flow under the scum baffle and over the decanter weir free of floatable scum under power failure or storm mode.

The decanter weir always is visible from the basin walkway. This feature provides the operator with a continuous visual check of the effluent quality.

The Wagner Fluid System decants from the top and moves downward withdrawing only clear water from the basin and preventing disruption of the settling solids. All maintenance can be performed from the safety platform without entering the basin.

Extended Aeration

ENGINEERED TO OPTIMIZE PERFORMANCE

The Extended Aeration wastewater treatment plant is based on time-proven, conservative process design, and engineered to optimize performance. Extended Aeration wastewater treatment plants are one of the simplest, economical and most versatile methods available to treat sanitary, industrial or agricultural wastewater. Treatment plants meet or exceed effluent parameters for most wastewater applications and are economical to install and operate.

Extended Aeration treatment plants provide the proper environment, sufficient oxygen, and other elements which allow the bacteria to consume the organic matter to live and multiply within the treatment plant. In this way the aerobic bacteria and microbes decompose the sewage and waste to a stable form free of odor and costly maintenance. Each plant consists of two major compartments, the main aeration chamber and a clarifier or settling tank. After initial screening, the wastewater enters the main aeration tank which has a retention time of approximately 24 hours. Here, natural bacteria feed on the organic fraction of the sewage and reduce BOD (Biochemical Oxygen Demand) concentrations. The partially treated sewage then flows to the final settling tank for clarification, prior to discharge. The effluent may be filtered and disinfected, depending on discharge permit requirements.

Key Points

Food Processing, Industrial & Municipal wastewater applications
Simple/low-cost design
Minimal sludge production
Constructed from concrete/epoxy
Coated carbon steel for long lasting corrosion-free service
Air operated lift pumps
Equipment start up
Flexible process that can treat a wide range of wastewater
May be designed with de-nitriﬁcation

Denitrification Filters

TIME PROVEN: TRIED & TESTED

Wagner Fluid Systems “De-Nite” denitrification and tertiary filtration system provides a time proven process for the reduction of nutrients (Nitrate-N and Phosphorus) as well as suspended solids from the effluent of wastewater treatment plants.

The process accepts secondary effluent by gravity or lift station to a distribution box with automatic control valves. The distribution box and control valves direct water to each filter cell in proper sequence. The anoxic biological process and conversion of Nitrate-N to elemental Nitrogen gas takes place on a fixed film of bacteria residing on and within a coarse mono media.

The down flow design of the Wagner Fluid Systems “De-nite” Filter effectively reduces suspended solids and phosphorus by addition of Alum and mechanical filtration through the bed. The anoxic bacteria require a carbon source as supplement which may include Methanol, Acetic Acid and other proprietary chemistry.

Key Points

Food Processing, Industrial & Municipal wastewater applications
Enhanced carbon feed source control and monitoring
Wide selection of level controls
Highest quality grade of media
Backwash, air scouring systems & control optimization
Simple operator controls & optional system integration into existing plant control panel
Operator training & ﬁeld service support

Iron & Manganese Filters

HIGH CAPACITY, HIGHER VOLUME

Wagner Fluid Systems Iron and Manganese Filters are engineered and designed to meet our customer’s specic requirements. The process utilizes Green Sand Plus^® which is superior to conventional Glauconite manganese Green Sand and synthetic catalyst. Green Sand Plus® eliminates the need for potassium permanganate regeneration and may be regenerated with chlorine, hypochlorite or any strong oxidant. It has signicantly higher capacity which results in higher volume throughput, reduced backwash cycles and volume of waste to drain. Systems come complete with all face piping, blowers, automatic valves and controls, for proper operation.

Key Points

Food Processing, Industrial & Municipal wastewater applications
Tanks constructed from FRP & carbon steel per ASME section VIII (stainless steel available as option)
Stainless steel distribution & collection manifolds
Stainless steel air scour piping
Pneumatic or electric actuated valves
Carbon steel face piping, cement lined rubber, HDPE or stainless steel as option
NEMA 4 painted carbon steel or stainless steel control panel with PLC & HMI touch screen

Control Panels

TOTAL CONTROL AT YOUR FINGERTIPS

Ram Industrial Services is a UL listed panel shop that provides custom control panels and engineering solutions for your complete system needs. From concept to completion and everything in between, Ram oers the highest level of service and technical expertise with our turnkey solutions. Specializing in: municipal water, wastewater control, sewer collection, head-works pump stations, water distribution pump stations, industrial, oil/gas, VFD, PLC, SCADA applications, and HVAC; Ram’s unique capabilities and custom engineering solutions provide an answer to even the most complex applications.

We take both the control and mechanical component to create a complete system for our customers. We provide the product, integrate it into the system, and distribute the custom systems. All control panels are engineered, designed, fabricated, and tested in house to ensure and maintain the highest quality control possible. Each control panel is fully documented and tested prior to delivery to reduce start-up, delay, and guarantee proper system operation.

Key Points

Food Processing, Industrial & Municipal wastewater applications
Design & Fabrication
PLC (Programmable Logic Control)
VFD (Variable Frequency Drive)
SCADA (Supervisory Control & Data Acquisition)
Equipment start up
UL 508A/ UL 698A listed control panels
CAD drawings
Wiring diagrams
24/7 on call availability

EXPLORE THE WIDE VARIETY OF SERVICES
INDUSTRIAL SERVICE SOLUTIONS PROVIDES

Industrial Service Solutions is your source for many industrial services, products, and information. Take a moment
to explore the other companies in the ISS family that are eager to serve you with unparalleled variety, expertise, and value.

Choose a service below to learn more about our capabilities and offerings. If you do not find what you’re looking for,
feel free to give us a call at 888.384.2111 or email marketing@iss-na.com. We’re always here to help.

Process Equipment Services

Rotating Equipment Services

CLEANER WATER